WerkMaster | Plug N Go Pcd W/Tcd Shark CCW

The WerkMaster PCD with TCD Shark counterclockwise Plug ‘N Go tooling is essential for removing thick coatings on concrete surfaces. This tooling is made only for installation on Plug ‘N Go plate on the counterclockwise toolheads of the WerkMaster Boss. The shark makes the tool highly effective at stripping away thick mastics, glues, membranes, and epoxies over 30 mils thick. This tool is very aggressive, and leaves a coarse profile on concrete surfaces. This tool operates best at 450 to 800 RPM for best results.

Be the first to review this product

Brand: WerkMaster

SKU: 002-1349-00

Manufacturer Part Number: 002-1349-00

Polycrystalline diamond abrasive with shark to remove mastics, glues, and epoxy, leaving rough profile on concrete below
Plug ‘N Go design made for the counterclockwise tool heads on the WerkMaster Boss
Operates best at 450 to 800 RPM, stripping coatings up to 30 mils in thickness
For clockwise tool heads, use 002-1350-00

Product Specifications

Equipment Type	Concrete Grinder tooling

Product Tags

New Arrivals (97)

Customers Also Bought

Picture of Drainzit™ Oil Changing Aid | 12mm Port | 1/4 In. Hose | Retail Packaging

This Titan Post Driver with 45-lb. driving head is a powerful, portable, self-contained post driving solution. Drives posts in about half the time of a manual driver. Powered by a 1.3 HP Honda 4-stroke engine that delivers 1850 beats per minute. Assembled and serviced in the USA. Includes post master drive cap for installing post master plus post

WerkMaster | Plug N Go Pcd W/Tcd Shark CCW

Drainzit™ Oil Changing Aid | 12mm Port | 1/4 In. Hose | Retail Packaging

Virginia Abrasives Double Cuboid Medium Bond | Orange | Box of 3

Virginia Abrasives Double Cuboid Medium Bond | Gold | Box of 3

Virginia Abrasives Double Dot Medium Bond | Gold | Box of 3

Brave | Fender Upgrade Kit | 12-In.-13-In. Mortar/Concrete

Titan Post Master Plus Driver | Commercial | 3-1/8-In Diameter | Gas-Powered Honda GX35